Grounding Strap
- Should be used at all times when working on the computer.
- This requires having it connected to your wrist and to the computer case.
The computer case has several #6-32 computer assembly screws or several #6-32 thumb screws keeping the cover secure. For these screws you need a 1/4 inch hex nut driver, or a #1 Phillips screw driver, or a #2 Phillips screw driver.
The power supply is mounted in the computer case with four #6-32 computer assembly screws. The same computer tools used for the case can be used for the power supply.
- Thumb screws
- Assembly screw
- 1/4 hex nut driver
- #1 Phillips Screwdriver
- #2 Phillips Screwdriver
The motherboard is mounted on several M3 brass motherboard standoffs, and secured with a like amount of M3 computer assembly screws. The M3 brass motherboard standoffs can be secured with a 3/16 inch hex nut driver, and the M3 computer assembly screws can tightened with the #0 or #1 Phillips screw driver.
The CPU with the heatsink/cooling fan and the memory modules require no special computer technition tools for installation
The CD drive, the DVD drive, the hard disk drive, and the floppy disk drive are mounted with 4 M3 computer assembly screws. Sometimes you will find the drives supplied with #4-40 Phillips screws. In either case you can use a 3/16 inch hex nut driver, or the #0 or #1 Phillips screw driver.
- M3 brass motherboard standoffs
- Digital multimeter - used for measuring voltage, current, and resistance
- PSU testers - Used for checking that the power supply unit is supplying the proper voltages.
- 5 inch needle-nose pliers...Used for gripping small parts.
- 1/8 inch flat head screw driver...Used as needed.
- 1/4 inch flat head screw driver...Used as needed.
- Small flashlight with batteries...For illuminating dark areas of the computer.
- Small piece of wire (paperclip)...For opening the CD and DVD drives when no power is available.
- Wire stripper and wire cutter...For preparing a piece of wire to complete a connection.
- Small electronic soldering iron...Used for making a soldered connection.
- Can of compressed gas...For cleaning dust off of computer parts
- 1 inch brush...For cleaning dust off computer parts.
